The XTOP3D XTOM blue-light 3D scanner efficiently captures complete 3D digital models of precision 3C electronic components with diverse geometries. By rapidly comparing these models against CAD designs, it provides a visual representation of full-dimensional deviations, precisely identifying areas that are too thick or too thin. It also performs radius and surface analysis to help detect manufacturing discrepancies, thereby optimizing production processes and quality inspection workflows.

The XTOP3D XTDIC 3D full-field strain measurement system, based on Digital Image Correlation (DIC) technology, was employed for four-point bending tests on decommissioned railway bridge box girders. It enabled dynamic monitoring of full-field strain distribution and the entire process of crack initiation and propagation during loading. The test results revealed the structural damage evolution patterns of the box girders and provided a scientific data basis for the service life assessment, maintenance strategy formulation, and safe operation decision-making of railway infrastructure.

The XTOP3D XTOM blue-light 3D scanner is designed for the 3D dimensional inspection of injection-molded parts used in 3C communication devices. Precise inspection data facilitates a closed-loop feedback mechanism between dimensional deviations and process parameters (such as mold temperature and holding pressure optimization), preventing the accumulation of errors during manufacturing, effectively enhancing inspection accuracy and efficiency, and enabling the comprehensive integration and digital analysis of inspection data.

The XTOP3D XTDIC 3D full-field strain measurement system utilizes Digital Image Correlation (DIC) technology to monitor wall deformation during the casting of novel architectural concrete. It tracks deformations caused by fluid impact during pouring, high-frequency dynamic deformations during vibration-based compaction, and micro-deformations during the setting and hardening phases, thereby providing data support to optimize architectural design, ensure construction safety, and enhance engineering quality.

The XTOP3D XTDIC 3D full-field strain measurement system utilizes DIC technology to perform fully automated, high-precision, full-field crack measurement during three-point bending tests on concrete beams. By employing correlation algorithms to calculate specimen strain and applying digital image processing techniques to detect crack characteristics—such as size, length, and orientation—the system provides a comprehensive, reliable, and accurate solution for crack measurement in concrete loading experiments.

The XTOP3D XTOM-12M blue-light 3D scanner boasts exceptional capability in capturing fine details, achieving micron-level accuracy in single-scan measurements. By integrating multi-scan stitching technology, it maintains strict control over overall accuracy when scanning small-to-medium-sized workpieces with complex contours, thereby ensuring the precision and reliability of the measurement data.

The XTOP3D XTOM industrial-grade blue-light 3D scanner efficiently performs full-field 3D scanning of complex, precision castings. It enables non-contact measurement and adapts to a wide range of environments and objects. Ideal for the full-field 3D inspection of small-to-medium precision castings, it supports diverse inspection requirements, including GD&T verification, material thickness analysis, and assembly analysis.

The XTOP3D XTDIC 3D full-field strain measurement system is based on Digital Image Correlation (DIC) technology. It is suitable for high-precision, full-field strain measurement on the surfaces of various composite materials. The system enables the accurate identification of points of maximum deformation and the observation of crack initiation, propagation, and coalescence. By providing an intuitive analysis of failure processes, it offers essential data support for the performance evaluation and design optimization of composite materials.

The XTOP3D XTOM blue-light 3D scanner delivers high-quality detail reproduction and features an excellent curvature sampling algorithm. It is capable of scanning workpieces with complex free-form surfaces, hole locations, and intricate features. Inspection data can be archived in real-time, facilitating data traceability and analysis, thereby establishing a digital quality management system.

The XTOP3D XTDIC-FLC sheet metal forming limit measurement system utilizes Digital Image Correlation (DIC) technology to provide non-contact, full-field, high-precision, and visual measurements. It enables the rapid and accurate determination of Forming Limit Curves (FLCs) and allows for the observation of material flow, strain evolution, and defect initiation (such as necking, wrinkling, and fracture) during the sheet metal stamping process. This system facilitates the analysis of material forming behavior, precise failure prediction, and the optimization of stamping process parameters.

The XTOP3D XTDIC 3D full-field strain measurement system utilizes DIC technology suitable for measurements in diverse environments—including high/low temperatures, underwater settings, reflective surfaces, and vacuums. By precisely determining the cameras' intrinsic and extrinsic matrices as well as deformation parameters, the system corrects for medium-induced distortion, thereby enabling accurate Digital Image Correlation (DIC) measurements.

The XTOP3D XTOM-STATION automated inspection center utilizes an automated 3D measurement solution combining an industrial robot—equipped with a blue-light 3D scanning probe—and a fully automated rotary table. It captures high-precision, highly detailed 3D data from workpiece surfaces to inspect and analyze specific dimensions or defects on small-to-medium-sized parts, providing an automated 3D measurement solution for a wide range of measurement tasks.

Leveraging advantages such as high precision, non-contact operation, and full-dimensional inspection, the XTOP3D XTOM blue-light 3D scanning and measurement system has become a vital tool for the 3C manufacturing industry to enhance product quality, optimize production processes, and reduce costs; it is widely used in the R&D, production, and quality control of products such as mobile phones, laptops, headphones, and audio equipment.

XTOP3D’s Digital Image Correlation (DIC) technology accurately measures the transient 3D displacement of automotive components under wind tunnel loading conditions. It analyzes the dynamic deformation of parts—such as doors, pillars, and hoods—subjected to aerodynamic forces. The visualized measurement results facilitate the optimization of vehicle body stiffness, the design of aerodynamic kits, and the enhancement of NVH performance.

The newly released XTOM-STATION automated inspection center from XTOP3D features the XTOM MATRIX 12M—a micron-level blue-light 3D scanning head—enabling high-precision, full-dimensional 3D scanning of workpieces with complex surfaces. Integrated with XTOP3D’s proprietary X-INSPECT software, the system streamlines the entire workflow—from scanning and inspection to report generation—making it ideal for automated batch 3D measurement of small-to-medium-sized components in sectors such as automotive manufacturing, aerospace, and precision engineering.

The XTOP3D XTOM-MATRIX 12M is a blue-light 3D scanner offering micron-level precision. Featuring metrology-grade accuracy of 6μm, 12.3-megapixel industrial cameras, exceptional detail capture and reproduction capabilities, high-precision scanning efficiency, and intelligent automated inspection functions, it delivers a revolutionary solution for the 3D digital metrology of complex components, driving simultaneous improvements in production efficiency and product quality.

The XTOP3D XTDIC-MICRO 3D microscopic strain measurement system utilizes microscopic DIC technology to measure the deformation of miniature electronic components under high and low-temperature conditions (25°C–300°C). By analyzing regions of strain concentration and maximum strain data, the system helps prevent failures caused by issues such as mismatched thermal expansion/contraction properties, mismatches in the temperature coefficients of internal leads and die coatings, and chip cracking.

The XTOP3D XTDIC 3D full-field strain measurement system utilizes Digital Image Correlation (DIC) technology to monitor deformation in lattice-anchor models designed for landslide control. Such simulation experiments facilitate a deeper understanding of landslide formation mechanisms, evolutionary processes, and failure modes; they reveal the mechanical responses and deformation patterns of geological bodies under various influencing factors, thereby providing a scientific basis for optimizing reinforcement designs.