新拓三维XTDIC-SPARK三维高速测量系统，用于六自由度振动台模拟地震载荷下的结构动力响应分析，被测物为大型结构模型（底座3m、高约7m），高速dic技术分析模型关键区域的位移场与应变场，评估其抗震性能、动力稳定性及破坏模式，检验其抗震设计的有效性，以及结构体系的可靠性。

The XTOP3D XTDIC-SPARK 3D high-speed measurement system, featuring high-speed DIC technology, is an effective solution for testing 3C electronic products for drop and collision deformation. The high-speed DIC measurement system offers the advantages of non-contact, high-precision, and full-field dynamic measurement. It accurately quantifies changes in displacement and strain fields, as well as failure evolution, helping to accelerate the development of high-reliability electronic devices.

The XTOP3D XTDIC-SPARK high-speed 3D measurement system can be used to obtain key data such as mobile phone drop deformation performance, flexural elastic modulus, maximum flexural compressive stress and strain during drop and compression tests. This helps evaluate the mechanical properties and reliability of mobile phone exterior glass and tempered casings.

High-speed digital image correlation (DIC) technology directly controls two high-speed cameras for image acquisition. It is capable of capturing high-speed images of the mobile phone's drop and collision transients, and can accurately measure the product's displacement, speed, posture, strain deformation and other data during a drop.

The XTOP3D XTDIC-SPARK 3D high-speed measurement system uses high-speed DIC technology to directly control high-speed cameras to acquire images. The 3D dynamic measurement and analysis software can provide high-precision displacement, velocity, acceleration and other data, which can be used for transient deformation and vibration analysis of rails.

The XTOP3D XTDIC three-dimensional full-field strain measurement system, based on digital image correlation (DIC) technology, measures full-field strain, displacement, velocity, acceleration, vibration, and other data without contact with the specimen. Compared to traditional contact sensors, it offers a wider range of applications, easier operation, and more comprehensive data, effectively assisting in automotive design optimization and factory inspection and evaluation.

Based on simulation verification on a 1:10 scale wing test bench, the XTOP3D XTDIC-STROBE 3D dynamic measurement system was used for simultaneous measurement and accuracy comparison. The results verified that the full-field measurement accuracy of the aircraft wing dynamic deformation reached 0.21mm/2m, meeting the requirements for monitoring wing deflection under flight loads. This provides a high-precision full-field dynamic deformation measurement solution for aircraft aeroelastic analysis.

In modern aircraft performance testing, motion analysis of aircraft and their structural components is often based on theoretical simulations or wind tunnel experiments. The XTOP3D DIC high-speed measurement system, combined with a high-speed camera, can measure the trajectory, attitude, displacement, and deformation of aircraft structural components and onboard objects while in flight.

新拓三维XTDIC-SPARK三维高速测量系统，通过直接控制高速摄像机采集目标运动过程，并跟踪运动全过程，利用XTDA动态软件对笔记本电脑外壳跌落瞬态变形进行分析，了解产品受损情况，评估产品包装组件在跌落时所能承受的坠落高度及耐冲击强度。

采用新拓三维高速数字图像相关技术（XTDIC-SPARK三维高速测量系统），可精准量化旋翼从启动到稳定转速的全流程应变场、位移分布与关键点运动轨迹，为无人机旋翼设计与优化提供数据支撑。

新拓三维XTDIC-SPARK三维高速测量系统，基于分析样品表面的散斑图案，通过高速摄像机捕获全视场数据，结合XTDA动态分析软件，分析全场位移、应变区域就变得直观、精准和可视化。对于高速事件的分析，XTDIC-SPARK三维高速测量系统具备标志点追踪功能。

通过振动台模拟试验，模拟人在行走和奔跑状态下背包肩带晃动测试，评估背包的人体工学性能设计、稳定性和舒适度。采用新拓三维XTDIC-STROBE三维动态测量系统，对模拟试验过程进行图像采集，DIC软件分析得到肩带在运动过程中的三维位移、运动轨迹、速度、加速度等测试数据结果。

为了研究泵体和电机在暖泵、起泵、运行、停泵和冷却五个阶段的动态行为，采用新拓三维XTDIC-STROBE三维动态测量系统，DIC技术分析5个阶段发生变形不对中的状况，并绘制在该阶段下泵体、出水管和入水管三者的位移变形曲线，分析变形具体位置和来源。