|
3D printing of the printed rocket launch vehicle  Case background As a new technology, 3D printing provides a new processing means for manufacturing industry. 3D printing is very suitable for the production of products with complex structures based on the principle of "additive material manufacturing". The product in this case is a structure rocket launcher model printed in 3D. By scanning and testing the measured object, the manufacturer can be guided to further optimize the pinting parameters and improve the quality of the product in 3D printing. Use equipment XTOM-MATRIX-5M 3D optical surface scanning system Measurement process The surface of the tested object is treated, the imaging agent is sprayed, the marking points are pasted and placed on the worktable. Using XTOM-MATRIX-5M to scan, data splicing is automatically completed. Comparing the scanned data with the design model in Geomagic Qualify software, setting the corresponding tolerance, the corresponding test results can be obtained, and the cross-section deviation can be detected and analyzed at the critical position, and the final test report can be output. Difficulties analysis There are many deep holes, deep grooves and complex structures. Measurement result |
Product center
Application cases
Technical Support
NEWS
Industrial manufacture
Biological medical treatment
Testing service
Contact us